Dual Layer Tubing
Optinova Dual Layer Tubing operates optimally at -32°C to 82°C and complies with EPA SESDPROC-301-R1. Raw materials are top quality resins without PFOA surfactant and can meet your specific requirements.
Groundwater Sampling Tubing
The inner layer is made from premium FEP to comply with FDA21 CFR 177.1550 and NSF51. High quality resin allows the liner to be unaffected by most chemicals and the jacket is mechanically enhanced.
- FEP Material Property
- Max cont. service temp.
- Unit
- ºC
- 200
- FEP Material Property
- Chemical resistance
- Unit
- N/A
- Excellent
- FEP Material Property
- Dielectric strength
- Unit
- Volt/mil
- 2 000
- FEP Material Property
- Volume resistivity
- Unit
- Ohm • cm
- > 10^18
- FEP Material Property
- Water absorption
- Unit
- %
- < 0.01
- FEP Material Property
- Oxygen index
- Unit
- %
- > 95
- FEP Material Property
- Tensile strength
- Unit
- MPa
- 24.1
- FEP Material Property
- Elongation
- Unit
- %
- 300
- FEP Material Property
- Melting point
- Unit
- ºC
- 270
- FEP Material Property
- Thermal conductivity
- Unit
- BTU/hr/ft2/ºF.in
- 1.4
FEP Material Property | Unit | |
---|---|---|
Max cont. service temp. | ºC | 200 |
Chemical resistance | N/A | Excellent |
Dielectric strength | Volt/mil | 2 000 |
Volume resistivity | Ohm • cm | > 10^18 |
Water absorption | % | < 0.01 |
Oxygen index | % | > 95 |
Tensile strength | MPa | 24.1 |
Elongation | % | 300 |
Melting point | ºC | 270 |
Thermal conductivity | BTU/hr/ft2/ºF.in | 1.4 |
Contact us
"*" indicates required fields